ABSTRACT
Objective: This study aimed to assess the impact of in vitro erosion provoked by different cola-based drinks (Coke types), associated or not with toothbrushing, to bonding to enamel. Material and methods: Forty-six bovine enamel specimens were prepared and randomly assigned into seven groups (N=8): C- Control (neither eroded nor abraded), ERO-RC: 3x/1-minute immersion in Regular Coke (RC), ERO-LC: 3x/1-minute immersion in Light Coke (LC), ERO-ZC: 3x/1-minute immersion in Zero Coke (ZC) and three other eroded groups, subsequently abraded for 1-minute toothbrushing (EROAB-RC, EROAB-LC and EROAB-ZC, respectively). After challenges, they were stored overnight in artificial saliva for a total of 24 hours and restored with Adper Single Bond 2/Filtek Z350. Buildup coronal surfaces were cut in 1 mm2 -specimens and subjected to a microtensile test. Data were statistically analyzed by two-way ANOVA/Bonferroni tests (α=0.05). Failure modes were assessed by optical microscopy (X40). The Interface of the restorations were observed using Confocal Laser Scanning Microscopy (CLSM). Results: All tested cola-based drinks significantly reduced the bond strength, which was also observed in the analyses of interfaces. Toothbrushing did not have any impact on the bond strength. CLSM showed that except for Zero Coke, all eroded specimens resulted in irregular hybrid layer formation. Conclusions: All cola-based drinks reduced the bond strength. Different patterns of hybrid layers were obtained revealing their impact, except for ZC. .
Subject(s)
Animals , Cattle , Carbonated Beverages , Dental Bonding/methods , Dental Enamel/drug effects , Tooth Erosion , Toothbrushing , Analysis of Variance , Composite Resins/chemistry , Dental Cements/chemistry , Dental Restoration Failure , Immersion , Microscopy, Confocal , Random Allocation , Saliva, Artificial/chemistry , Surface Properties/drug effects , Tensile Strength , Time Factors , Tooth AbrasionABSTRACT
O objetivo do estudo foi avaliar o efeito da limpeza com ácido fosfórico após condicionamento da cerâmica e do tratamento térmico do silano na resistência de união de um cimento resinoso à cerâmica de dissilicato de lítio submetido ao envelhecimento. Método: Foram confeccionados sessenta e quatro blocos de cerâmica de dissilicato de lítio (IPS e-¬‐max CAD, Ivoclar Vivadent) e de resina composta (7x8x4mm). Os corpos de prova foram divididos aleatoriamente em 4 grupos (n=16) que receberam os seguintes tratamentos: HFS (grupo controle): ácido fluorídrico 10 % e silano; HFPS: ácido fluorídrico, ácido fosfórico 37% e silano; HFSa: ácido fluorídrico e silano aquecido (45◦C ± 5◦C); HFPSa: ácido fluorídrico, ácido fosfórico e silano aquecido. Os espécimes foram cimentados com um cimento resinoso dual, posteriormente os corpos de prova foram divididos em duas condições de envelhecimento (n=8): N - sem envelhecimento e TC: termociclagem 12.000X, 5◦C - 55 ◦C. Foram submetidos ao teste de microtração em uma máquina de testes com velocidade de 0,7mm/min. As superfícies fraturadas foram examinadas para determinar o modo de falha. Os dados estatísticos foram analisados através da Anova de 2 fatores e as médias comparadas por meio do teste Tukey (p< 0.05). Resultados: o grupo HFSa envelhecido apresentou o maior valor de resistência de união (21,49 ± 2,29 MPa), entretanto, sem diferença estatística para o grupo controle (p<0,05). Não houve diferença estatisticamente significante entre as amostras envelhecidas e não envelhecidas, entretanto, foi observada uma diferença estatisticamente significante no grupo HFSa. (p<0,05). Importância: O tratamento térmico do silano e a limpeza pós-condicionamento com ácido fosfórico não potencializou a resistência de união da cerâmica à resina...
The aim of this study was to evaluate the effect of cleaning with phosphoric acid after etching of ceramic and heat treatment of the silane with a stream of hot air on the bond strength of a resin cemente to lithium dissiliacte ceramic submitted to aging. Method: Sixty-four blocks-ceramic lithium silicate (IPS e-max CAD, Ivoclar Vivadent) and composite resin were fabricated (7x8x4mm). The specimens were randomly divided into 4 groups (n = 16) that received the following treatments: HFS (control group): 10% hydrofluoric acid and silane; HFPS: hydrofluoric acid, 37% phosphoric acid and silane; HFSA: hydrofluoric acid and silane heated (45◦C ± 5◦C); HFPSa: hydrofluoric acid, phosphoric acid and heated silane. The specimens were cemented with a dual resin cement, later the specimens were divided into two aging conditions (n = 8): N - no aging and TC: thermocycling, 12,000 x 5◦C - 55◦C. They were submitted to microtensile test in a testing machine with a speed of 0.7 mm / min. Fractured surfaces were examined to determine the failure mode. Statistical data were analyzed by ANOVA with 2 factors and the averages compared by Tukey test (p <0,05). Results: The group HFSa aged showed the highest bond strength (21.49 ± 2.29 MPa), however, without statistical difference for the control group. There was no statistically significant difference between aged and non-aged samples, except for, a statistically significant difference in the HFSA group (p <0.05). Significance: The heat treatment of the silane and cleaning after etching with phosphoric acid did not increase the bond strength of ceramic resin...